Current Capabilities

  • 36,000 sq. ft. shop with a 5-ton crane and two 500lbs jib cranes
  • Mitsubishi 3015 LVPLUS II Series
    • 4,500 Watt Laser – 5′ x 10′ Dual Pallet Table
    • Cuts up to 1″ Mild Steel and 1/2″ Stainless and Aluminum
  • Mitsubishi 3015 GX-F80 Advanced Series
    • 8kw Fiber Laser – 5′ x 10′ Dual Pallet Table
    • Cuts up to 1″ Mild Steel, Stainless, Aluminum
  •  Wele CNC Horizontal Boring and Machining Center (NEW!)
    • X axial travel (table movement) mm/in. 1,500/59.0″
    • Y axial travel (carriage movement) mm/in. 1,200/47.2″
    • Z axial travel (head stock movement) mm/in. 900/35.4″
    • Repeatability accuracy mm/in. +/- 0.003 (+/- 0.0004″)
  • Haco ERMS 36150 Hydraulic Press Brake 12ft. x 1/4″ bending capacity.
  • Haco Shear – 10ft. x 1/4″ shearing capacity
  • Two Samson Rolls – capabilities 10 gauge x 48″, smallest diameter 4″
  • Tennsmith Hand Brake 16 gauge x 48″
  • Marvel Vertical Saw 13″ x 18″ capacity c/w 45 deg. Mitre left and right
  • 50 Ton Iron Worker – shearing and punching up to 1/2″ plate
  • Two Miller Syncrowave 350 Tig/Stick AC/DC Amperage 3-350
  • Miller Dynasty 350 Tig/Stick AC/DC Amperage 2-350
  • Arcmaster 501 pulse Mig/Tig/Stick machines for pulse Stainless and Aluminum
  • Two Miller Deltaweld 451, Swing Arcs c/w 30 ft. Reach
  • Lincoln Gas Generator/Welder
  • Miller 2050 Plasma up to 1-1/4″
  • Gullco Turntable, capacity 250 lb. Horizontal, 100 lb. Vertical
  • Reiner Turntable, 2 ton Horizontal capacity
  • 4″ x 48″ Belt Sander, Roll in Bandsaw, Radial Drill, layout Table – 6ft. x 16ft., DeVilbiss Air Compressor 120PSI c/w dryer and spare tank
  • 36 x 48 Sand Blast Cabinet
  • 72″ x 192″ Layout table with “T” Slots